Preparation and administration
OPDIVO preparation and administration1
Visually inspect drug product solution for particulate matter and discoloration prior to administration. OPDIVO is a clear to opalescent, colorless to pale-yellow solution. Discard the vial if the solution is cloudy, is discolored, or contains extraneous particulate matter other than a few translucent-to-white, proteinaceous particles. Do not shake the vial.
PREPARATION OF INFUSION
- Withdraw the required volume of OPDIVO and transfer into an intravenous container
- Dilute OPDIVO with either 0.9% sodium chloride injection, USP or 5% dextrose injection, USP to prepare an infusion with a final concentration ranging from 1 mg/mL to 10 mg/mL. The total volume of infusion must not exceed 160 mL
- For adult and pediatric patients with body weight ≥40 kg, do not exceed a total volume of infusion of 160 mL
- For adult and pediatric patients with body weight <40 kg, the total volume of infusion must not exceed 4 mL/kg of body weight
- Mix diluted solution by gentle inversion. Do not shake
- Discard partially used vials or empty vials of OPDIVO
STORAGE AFTER PREPARATION
- The product does not contain a preservative
- After preparation, store the OPDIVO infusion either:
- at room temperature and room light for no more than 8 hours from the time of preparation to end of the infusion. Discard diluted solution if not used within 8 hours from the time of preparation; or
- under refrigeration at 2°C to 8°C (36°F to 46°F) and protected from light for no more than 7 days from the time of preparation to end of infusion. Discard diluted solution if not used within 7 days from the time of preparation
- Do not freeze
INSTRUCTIONS FOR ADMINISTRATION
- Administer the infusion over 30 minutes through an IV line containing a sterile, non-pyrogenic, low protein binding, in-line filter (pore size of 0.2–1.2 micrometers)
- Administer OPDIVO in combination with other therapeutic agents as follows:
- With YERVOY: administer OPDIVO first followed by YERVOY on the same day
- With platinum-doublet chemotherapy: administer OPDIVO first followed by platinum-doublet chemotherapy on the same day
- With YERVOY and platinum-doublet chemotherapy: administer OPDIVO first followed by YERVOY and then platinum-doublet chemotherapy on the same day
- With fluoropyrimidine- and platinum-containing chemotherapy: administer OPDIVO first followed by fluoropyrimidine- and platinum-containing chemotherapy on the same day
- Use separate infusion bags and filters for each infusion
- Do not coadminister other drugs through the same IV line
- Flush the entire IV line at the end of infusion
OPDIVO + YERVOY preparation and administration1,2
OPDIVO
Visually inspect drug product solution for particulate matter and discoloration prior to administration. OPDIVO is a clear to opalescent, colorless to pale-yellow solution. Discard the vial if the solution is cloudy, is discolored, or contains extraneous particulate matter other than a few translucent-to-white, proteinaceous particles. Do not shake the vial.
PREPARATION OF INFUSION
- Withdraw the required volume of OPDIVO and transfer into an intravenous container
- Dilute OPDIVO with either 0.9% sodium chloride injection, USP or 5% dextrose injection, USP to prepare an infusion with a final concentration ranging from 1 mg/mL to 10 mg/mL. The total volume of infusion must not exceed 160 mL
- For adult and pediatric patients with body weight ≥40 kg, do not exceed a total volume of infusion of 160 mL
- For adult and pediatric patients with body weight <40 kg, the total volume of infusion must not exceed 4 mL/kg of body weight
- Mix diluted solution by gentle inversion. Do not shake
- Discard partially used vials or empty vials of OPDIVO
STORAGE AFTER PREPARATION
- The product does not contain a preservative
- After preparation, store the OPDIVO infusion either:
- at room temperature and room light for no more than 8 hours from the time of preparation to end of the infusion. Discard diluted solution if not used within 8 hours from the time of preparation; or
- under refrigeration at 2°C to 8°C (36°F to 46°F) and protected from light for no more than 7 days from the time of preparation to end of infusion. Discard diluted solution if not used within 7 days from the time of preparation
- Do not freeze
INSTRUCTIONS FOR ADMINISTRATION
- Administer the infusion over 30 minutes through an IV line containing a sterile, non-pyrogenic, low protein binding, in-line filter (pore size of 0.2–1.2 micrometers)
- Administer OPDIVO in combination with other therapeutic agents as follows:
- With YERVOY: administer OPDIVO first followed by YERVOY on the same day
- With platinum-doublet chemotherapy: administer OPDIVO first followed by platinum-doublet chemotherapy on the same day
- With YERVOY and platinum-doublet chemotherapy: administer OPDIVO first followed by YERVOY and then platinum-doublet chemotherapy on the same day
- With fluoropyrimidine- and platinum-containing chemotherapy: administer OPDIVO first followed by fluoropyrimidine- and platinum-containing chemotherapy on the same day
- Use separate infusion bags and filters for each infusion
- Do not coadminister other drugs through the same IV line
- Flush the entire IV line at the end of infusion
YERVOY
- Do not shake product
- Inspect parenteral drug products visually for particulate matter and discoloration prior to administration. Discard vial if solution is cloudy, there is pronounced discoloration (solution may have pale-yellow color), or there is foreign particulate matter other than translucent-to-white, amorphous particles
PREPARATION OF INFUSION
- Allow the vials to stand at room temperature for approximately 5 minutes prior to preparation of infusion
- Withdraw the required volume of YERVOY and transfer into an IV bag
- Dilute with 0.9% sodium chloride injection, USP or 5% dextrose injection, USP to prepare a diluted solution with a final concentration ranging from 1 mg/mL to 2 mg/mL. Mix diluted solution by gentle inversion
- Store the diluted solution for no more than 24 hours under refrigeration (2°C to 8°C, 36°F to 46°F) or at room temperature (20°C to 25°C, 68°F to 77°F)
- Discard partially used vials or empty vials of YERVOY
INSTRUCTIONS FOR ADMINISTRATION
- Do not mix YERVOY with, or administer as an infusion with, other medicinal products
- Flush the IV line with 0.9% sodium chloride injection, USP or 5% dextrose injection, USP after each dose
- Administer diluted solution through an IV line containing a sterile, non-pyrogenic, low protein binding, in-line filter
When administered in combination with OPDIVO, infuse OPDIVO first followed by YERVOY on the same day. When administered with OPDIVO and platinum-doublet chemotherapy, infuse OPDIVO first followed by YERVOY and then platinum-doublet chemotherapy on the same day. Use separate infusion bags and filters for each infusion.
Refer to the respective prescribing information for each therapeutic agent administered in combination with OPDIVO for the recommended preparation and administration information, as appropriate.
IV=intravenous.
OPDIVO Qvantig preparation and administration3
To prevent medication errors, check the vial labels to ensure that the drug being prepared and administered is OPDIVO Qvantig for subcutaneous use and NOT intravenous nivolumab. Do NOT administer OPDIVO Qvantig intravenously. OPDIVO Qvantig should be administered by a healthcare professional.
Each OPDIVO Qvantig vial is for one-time use only. It is a ready-to-use solution for injection. It should not be diluted.
Visually inspect for particulate matter and discoloration prior to administration. OPDIVO Qvantig is a clear to opalescent, colorless to yellow solution. Discard if the solution is discolored or contains extraneous particulate matter other than a few translucent-to-white particles. Do not shake.
PREPARATION OF INJECTION
No incompatibilities were observed between OPDIVO Qvantig and polypropylene and polycarbonate syringes, or between OPDIVO Qvantig and polyethylene, polyurethane, polyvinyl chloride, and fluorinated ethylene propylene subcutaneous administration sets.
A syringe and a transfer needle are needed to withdraw OPDIVO Qvantig solution from the vial. OPDIVO Qvantig may be injected subcutaneously using a 23G-25G (3/8”-5/8”) hypodermic injection needle or subcutaneous administration set (eg., winged/butterfly).
- 600 mg nivolumab and 10,000 units hyaluronidase
- Allow 1 OPDIVO Qvantig vial to reach room temperature, then withdraw 5 mL of OPDIVO Qvantig into the syringe.
- 900 mg nivolumab and 15,000 units hyaluronidase
- Allow 2 OPDIVO Qvantig vials to reach room temperature, then withdraw 5 mL from one vial and 2.5 mL from the other vial, for a total volume of 7.5 mL of OPDIVO Qvantig into a single syringe.
- 1,200 mg nivolumab and 20,000 units hyaluronidase
- Allow 2 OPDIVO Qvantig vials to reach room temperature, then withdraw 10 mL of OPDIVO Qvantig into a single syringe.
Select the appropriate syringe label provided in the carton that matches the prescribed dose and apply to the prepared syringe.
Discard partially used or empty vials of OPDIVO Qvantig.
If the dose is not to be used immediately, attach a tip cap to the syringe prior to storage. To avoid clogging of the hypodermic injection needle, attach a 23G-25G (3/8”-5/8”) hypodermic injection needle to the syringe immediately prior to administration.
STORAGE IN SYRINGE
Once withdrawn into the syringe, OPDIVO Qvantig should be used immediately. If not used immediately, store the syringe:
- In the refrigerator at 2°C to 8°C (36°F to 46°F), protected from light for up to 48 hours; do not freeze, or
- At room temperature 20°C to 25°C (68°F to 77°F) for up to 8 hours. Storage at room temperature for this duration does not require protection from light.
- Discard if storage time exceeds these limits.
- If stored in the refrigerator, allow the solution to come to room temperature before administration.
INSTRUCTIONS FOR ADMINISTRATION
- Administer the full contents of the syringe into the subcutaneous tissue of 1 of the 4 quadrants of the abdomen, or thigh over a period of 3 to 5 minutes.
- Alternate injection sites across the 4 quadrants of the abdomen or thighs for successive injections. Do not inject into areas where the skin is tender, red, or bruised, or areas where there are scars or moles. If the administration of OPDIVO Qvantig is interrupted, continue administering at the same site, or at an alternate site
- During treatment with OPDIVO Qvantig, do not administer other subcutaneous medications at the same site used for OPDIVO Qvantig
Treatment Modifications
See recommended dosing modifications for immune-mediated adverse reactions.
Dosing Schedules
Find dosing information to get patients started on therapy.
OPDIVO Dosing Guide
A guide to dosing across all indications.
References:
- OPDIVO [package insert]. Princeton, NJ: Bristol-Myers Squibb Company.
- YERVOY [package insert]. Princeton, NJ: Bristol-Myers Squibb Company.
- OPDIVO Qvantig [package insert]. Princeton, NJ: Bristol-Myers Squibb Company.